RM新时代新项目,RM新时代专业团队|首入球时间

How is the safety of IMPRESIND gas radiant heating system guaranteed?

time：2025-05-19
hits：188次
source：正弘奧能

Gas infrared radiation heating system refers to a method that uses combustible gases such as natural gas, liquefied petroleum gas and coal gas to generate infrared rays of a certain wavelength through specific combustion and radiation devices, and transfers heat energy through the propagation of these infrared rays to achieve heating. This method has the advantages of reducing heat energy transfer links, high efficiency, uniform temperature distribution and comfort. And it can achieve automatic control of constant temperature and timing, and the energy-saving effect is also quite obvious. Especially when used in large Spaces, the gas infrared radiation heating system has more advantages that convection heating cannot match.


	 


	<img src="http://m.hzhonghua.com/Uploads/image/20250519/20250519102338_69918.jpg" alt="" /> 

 
The gas radiant heating equipment promoted and sold by Beijing Leadway Power Co., Ltd. adopts negative pressure operation technology. Before the system is ignited, the vacuum pump starts to work first. Only when the controller confirms that the negative pressure is normal will the ignition test be carried out. When any link in the system (power supply, gas supply, negative pressure, ignition) malfunctions, the system will automatically shut down. It fully guarantees the safety of the equipment and the heating area. 
 
IMPRESIND gas radiant heating system is controlled and monitored by an electronic device each time the fan is started for heating to ensure the correct gas pressure, ignition condition and flame combustion state in the radiant circuit. Once any abnormality occurs, the gas supply is immediately cut off and the equipment is locked. 
 
The radiation section of IMPRESIND gas radiant heating system is composed of a series of modules ranging from 2 to 6 meters in length. Each module is composed of radiation tubes made of black and gray double-sided impregnated aluminum alloy steel, and is connected with special joints. It has special high temperature and flexibility. This solution does not use sealing compounds, compensating for the expansion caused by module heating, so that they will not cause dangerous expansion and stretching, and can be used continuously for a long time. 
 
Practice has proved that IMPRESIND gas radiant heating system can effectively solve the problem of unreasonable temperature distribution in large Spaces. Theoretically, it saves 30% to 50% of energy compared with convective heating methods, and can achieve room temperature control as well as time and area control, with very obvious economic benefits. Therefore, gas infrared radiation heating technology is highly suitable for heating in various railway and subway maintenance depots, industrial plants, warehouses and other large Spaces. 
 
According to the "Code for Design of Heating, Ventilation and Air Conditioning" (GB50019-2003) : "The installation height of gas infrared radiators should be determined based on human comfort, but should not be less than 3 meters." This system is suitable for heating in large Spaces with a height higher than 4 meters, such as large factories, garages, large exhibition halls, auditoriums, stadiums and other places. For industrial plants, the rationality of the plan should be discussed based on the specific conditions of the production process. For instance, factory Spaces that generate a large amount of dust, fibers, volatile, flammable, and corrosive gases (mists) during the production process are not suitable for using gas radiant heating systems.

RM新时代官网网址

How is the safety of IMPRESIND gas radiant heating system guaranteed?